Suspect, Nontarget Screening, and Toxicity Prediction of Per- and Polyfluoroalkyl Substances in the Landfill Leachate.

Landfills are the final stage of urban wastes containing perfluoroalkyl and polyfluoroalkyl substances (PFASs). PFASs in the landfill leachate may contaminate the surrounding groundwater. As major environmental pollutants, emerging PFASs have raised global concern. Besides the widely reported legacy PFASs, the distribution and potential toxic effects of numerous emerging PFASs remain unclear, and unknown PFASs still need discovery and characterization. This study proposed a comprehensive method for PFAS screening in leachate samples using suspect and nontarget analysis. A total of 48 PFASs from 10 classes were identified; nine novel PFASs including eight chloroperfluoropolyether carboxylates (Cl-PFPECAs) and bistriflimide (HNTf2) were reported for the first time in the leachate, where Cl-PFPECA-3,1 and Cl-PFPECA-2,2 were first reported in environmental media. Optimized molecular docking models were established for prioritizing the PFASs with potential activity against peroxisome proliferator-activated receptor α and estrogen receptor α. Our results indicated that several emerging PFASs of N-methyl perfluoroalkyl sulfonamido acetic acids (N-MeFASAAs), n:3 fluorotelomer carboxylic acid (n:3 FTCA), and n:2 fluorotelomer sulfonate (n:2 FTSA) have potential health risks that cannot be ignored.

Characterizing Volatile Emissions and Combustion Byproducts from Aqueous Film-Forming Foams Using Online Chemical Ionization Mass Spectrometry.

Aqueous film-forming foams (AFFFs) are used in firefighting applications and often contain per- and polyfluoroalkyl substances (PFAS), which can detrimentally impact environmental and biological health. Incineration is a potential disposal method for AFFFs, which may produce secondary PFAS and other air pollutants. We used online chemical ionization mass spectrometry (CIMS) to measure volatile PFAS emissions from incinerating AFFF concentrate solutions. We quantified perfluorinated carboxylic acids (PFCAs) during the incineration of legacy and contemporary AFFFs. These included trifluoroacetic acid, which reached mg m-3 quantities in the incinerator exhaust. These PFCAs likely arose as products of incomplete combustion of AFFF fluorosurfactants with lower peak furnace temperatures yielding higher PFCA concentrations. We also detected other short-chain PFAS, and other novel chemical products in AFFF combustion emissions. The volatile headspace above AFFF solutions contained larger (C ≥ 8), less oxidized PFAS detected by CIMS. We identified neutral PFAS resembling fluorotelomer surfactants (e.g., fluorotelomer sulfonamide alkylbetaines and fluorotelomer thioether amido sulfonates) and fluorotelomer alcohols in contemporary AFFF headspaces. Directly comparing the distinct chemical spaces of AFFF volatile headspace and combustion byproducts as measured by CIMS provides insight toward the chemistry of PFAS during thermal treatment of AFFFs.

Assessment of perfluorocarboxylic acids in fluorinated high-density polyethylene containers and estimation of potential non-cancer risks associated with anticipated use scenarios.

High density polyethylene (HDPE) containers are fluorinated to impart barrier properties that prevent permeation of liquid products filled in the container. The process of fluorination may result in the unintentional formation of certain per- and polyfluoroalkyl substances (PFAS), specifically perfluoroalkyl carboxylic acids (PFCAs), as impurities. This study measured the amounts of PFCAs that may be present in the fluorinated HDPE containers, which could migrate into products stored in these containers. Migration studies were also conducted using water and mineral spirits to estimate the amount of PFCAs that might be found in the products stored in these containers. The migration results were used to conservatively model potential PFCA exposures from use of six product types: indoor-sprayed products, floor products, hand-applied products, manually-sprayed pesticides, hose-end sprayed products, and agricultural (industrial) pesticides. The potential that such uses could result in a non-cancer hazard was assessed by comparing the modeled exposures to both applicable human non-cancer toxicity values and environmental screening levels. Environmental releases were also compared to aquatic and terrestrial predicted no-effect concentrations (PNECs). The results of these analyses indicated no unreasonable non-cancer risk to humans, aquatic species, and terrestrial species from PFCAs in products stored in fluorinated HDPE containers.

Per- and polyfluoroalkyl substances (PFAS) in Canadian municipal wastewater and biosolids: Recent patterns and time trends 2009 to 2021.

The concentrations of per- and polyfluoroalkyl substances (PFAS) were determined in raw influent, final effluent, and treated biosolids at Canadian wastewater treatment plants (WWTPs) to evaluate the fate of PFAS through liquid and solids trains of typical treatment process types used in Canada and to assess time trends of PFAS in wastewater between 2009 and 2021. Data for 42 PFAS in samples collected from 27 WWTP across Canada were used to assess current concentrations and 48 WWTPs were included in the time trends analysis. Although regulated and phased-out of production by industry since the early 2000s and late 2000s/early2010s, respectively, perfluorooctanesulfonate (PFOS), perfluorooctanoate (PFOA), and other long-chain PFAS continue to be widely detected in Canadian wastewater and biosolids. Short-chain PFAS that are not currently regulated in Canada were also widely detected. In general, elevated concentrations of several PFAS were observed at WWTPs that receive landfill leachate. Except for PFOS, concentrations of long-chain perfluoroalkyl carboxylates (PFCAs) and perfluoroalkane sulfonates (PFSAs) generally decreased over time in influent, effluent, and biosolids, which is attributable to industrial production phase-outs and regulations. Concentrations of PFOS did not decrease over time in wastewater media. This indicates that regulatory action and industrial phase-outs of PFOS are slow to be reflected in wastewater. Concentrations of short-chain PFCAs in wastewater influent and effluent consistently increased between 2009 and 2021, which reflect the use of short-chain PFAS as replacements for phased-out and regulated longer-chained PFAS. Short-chain PFAS were infrequently detected in biosolids. Continued periodic monitoring of PFAS in wastewater matrices in Canada and throughout the world is recommended to track the effectiveness of regulatory actions, particularly activities to address the broad class of PFAS.

Mass spectrometry imaging of natural carbonyl products directly from agar-based microbial interactions using 4-APEBA derivatization.

Aliphatic carboxylic acids, aldehydes, and ketones play diverse roles in microbial adaptation to their microenvironment, from excretion as toxins to adaptive metabolites for membrane fluidity. However, the spatial distribution of these molecules throughout biofilms and how microbes in these environments exchange these molecules remain elusive for many of these bioactive species due to inefficient molecular imaging strategies. Herein, we apply on-tissue chemical derivatization (OTCD) using 4-(2-((4-bromophenethyl)dimethylammonio)ethoxy)benzenaminium dibromide (4-APEBA) on a co-culture of a soil bacterium (Bacillus subtilis NCIB 3610) and fungus (Fusarium sp. DS 682) grown on agar as our model system. Using matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI), we spatially resolved more than 300 different metabolites containing carbonyl groups within this model system. Various spatial patterns are observable in these species, which indicate possible extracellular or intercellular processes of the metabolites and their up- or downregulation during microbial interaction. The unique chemistry of our approach allowed us to bring additional confidence in accurate carbonyl identification, especially when multiple isomeric candidates were possible, and this provided the ability to generate hypotheses about the potential role of some aliphatic carbonyls in this B. subtilis/Fusarium sp. interaction. The results shown here demonstrate the utility of 4-ABEBA-based OTCD MALDI-MSI in probing interkingdom interactions directly from microbial co-cultures, and these methods will enable future microbial interaction studies with expanded metabolic coverage.IMPORTANCEThe metabolic profiles within microbial biofilms and interkingdom interactions are extremely complex and serve a variety of functions, which include promoting colonization, growth, and survival within competitive and symbiotic environments. However, measuring and differentiating many of these molecules, especially in an in situ fashion, remains a significant analytical challenge. We demonstrate a chemical derivatization strategy that enabled highly sensitive, multiplexed mass spectrometry imaging of over 300 metabolites from a model microbial co-culture. Notably, this approach afforded us to visualize over two dozen classes of ketone-, aldehyde-, and carboxyl-containing molecules, which were previously undetectable from colonies grown on agar. We also demonstrate that this chemical derivatization strategy can enable the discrimination of isobaric and isomeric metabolites without the need for orthogonal separation (e.g., online chromatography or ion mobility). We anticipate that this approach will further enhance our knowledge of metabolic regulation within microbiomes and microbial systems used in bioengineering applications.

Novel PFAS-specific monitoring approach for highly impacted surface waters.

In regulatory environmental monitoring programs, only a very small fraction of the vast number of per- and polyfluoroalkyl substances (PFAS) are investigated by target analysis. Therefore, non-target analysis (NTA) studies are increasingly conducted to detect unknown or unnoticed PFAS. These studies are often based on a few grab samples. Thus, discontinuously emitted PFAS from industrial batch processes might be easily overlooked. To address this deficiency and obtain in-depth information on the occurrence and temporal trend of PFAS in surface water impacted by treated industrial waste water, a comprehensive target and NTA study was implemented for 29 months. Elevated PFAS concentrations with up to 10.8 µg L-1 were detected in the river water by target analysis. In addition to PFAS target analysis, the water samples were analyzed by liquid chromatography-high-resolution tandem mass spectrometry (LC-HRMS/MS). Data processing strategies and various filtering steps were applied to prioritize PFAS. Substances were identified by comparing data to available internal and external PFAS suspect lists, a fragment ion and neutral loss list, and spectral libraries. Several compounds were unequivocally identified based on reference standards. Fifty-five PFAS were (tentatively) identified using NTA. Of those, 43 could be assigned to 13 different homologous series. Partly fluorinated short-chain carboxylic acids (H-PFCA) and sulfonic acids (H-PFSA) were predominantly found in addition to perfluoroalkyl carboxylic acids (PFCA) and the alkyl ether carboxylic acid DONA. To the best of our knowledge, 12 PFAS were reported in surface water for the first time. Signal intensities of individual PFAS and signal ratios varied widely over time, which may indicate batch operations leading to discontinuous emission. Results and insights from this screening approach on PFAS can be used to optimize forthcoming surface water monitoring programs by including newly identified PFAS and selecting appropriate sampling intervals.

Screening Novel Per- and Polyfluoroalkyl Substances in Human Blood Based on Nontarget Analysis and Underestimated Potential Health Risks.

Nontarget analysis has gained prominence in screening novel perfluoroalkyl and polyfluoroalkyl substances (PFASs) in the environment, yet remaining limited in human biological matrices. In this study, 155 whole blood samples were collected from the general population in Shijiazhuang City, China. By nontarget analysis, 31 legacy and novel PFASs were assigned with the confidence level of 3 or above. For the first time, 11 PFASs were identified in human blood, including C1 and C3 perfluoroalkyl sulfonic acids (PFSAs), C4 ether PFSA, C8 ether perfluoroalkyl carboxylic acid (ether PFCA), C4-5 unsaturated perfluoroalkyl alcohols, C9-10 carboxylic acid-perfluoroalkyl sulfonamides (CA-PFSMs), and C1 perfluoroalkyl sulfonamide. It is surprising that the targeted PFASs were the highest in the suburban population which was impacted by industrial emission, while the novel PFASs identified by nontarget analysis, such as C1 PFSA and C9-11 CA-PFSMs, were the highest in the rural population who often drank contaminated groundwater. Combining the toxicity prediction results of the bioaccumulation potential, lethality to rats, and binding affinity to target proteins, C3 PFSA, C4 and C7 ether PFSAs, and C9-11 CA-PFSMs exhibit great health risks. These findings emphasize the necessity of broadening nontarget analysis in assessing the PFAS exposure risks, particularly in rural populations.

Comprehensive Assessment of Exposure Pathways for Perfluoroalkyl Ether Carboxylic Acids (PFECAs) in Residents Near a Fluorochemical Industrial Park: The Unanticipated Role of Cereal Consumption.

With the replacement of perfluorooctanoic acid (PFOA) with perfluorinated ether carboxylic acids (PFECAs), residents living near fluorochemical industrial parks (FIPs) are exposed to various novel PFECAs. Despite expectations of low accumulation, short-chain PFECAs, such as perfluoro-2-methoxyacetic acid (PFMOAA), previously displayed a considerably high body burden, although the main exposure routes and health risks remain uncertain. Here, we explored the distribution of perfluoroalkyl and polyfluoroalkyl substances (PFASs) in diverse environmental media surrounding a FIP in Shandong Province, China. PFECAs were found at elevated concentrations in all tested matrices, including vegetables, cereals, air, and dust. Among residents, 99.3% of the ∑36PFAS exposure, with a 43.9% contribution from PFECAs, was due to gastrointestinal uptake. Dermal and respiratory exposures were negligible at 0.1 and 0.6%, respectively. The estimated daily intake (EDI) of PFMOAA reached 114.0 ng/kg body weight (bw)/day, ranking first among all detected PFECAs. Cereals emerged as the dominant contributor to PFMOAA body burden, representing over 80% of the overall EDI. The median EDI of hexafluoropropylene oxide dimer acid (HFPO-DA) was 17.9 ng/kg bw/day, markedly higher than the USEPA reference doses (3.0 ng/kg bw/day). The absence of established threshold values for other PFECAs constrains a comprehensive risk assessment.

Non-extractable PFAS in functional textiles - characterization by complementary methods: oxidation, hydrolysis, and fluorine sum parameters.

Per- and polyfluoroalkyl substances (PFAS) are widely used for durable water-repellent finishing of different fabrics and textiles such as outdoor clothing, carpets, medical textiles and more. Existing PFAS extraction techniques followed by target analysis are often insufficient for detecting widely used side-chain fluorinated polymers (SFPs) that are barely or non-extractable. SFPs are typically copolymers consisting of a non-fluorinated backbone with perfluoroalkyl side-chains to obtain desired properties. We compared the accessible analytical information and performance of complementary techniques based on oxidation (dTOP and PhotoTOP assays), hydrolysis (THP assay), standard extraction, extractable organic fluorine (EOF), and total fluorine (TF) with five functional textiles and characterized 7 further textiles only by PhotoTOP oxidation. The results show that when applied directly to textile samples, dTOP and PhotoTOP oxidation and also hydrolysis (THP) are able to capture large fractions of TF in the form of perfluoroalkyl side-chains present in the textiles while methods relying on extracts (EOF, target and non-target analysis) yield much lower fractions of TF (e.g., factor ∼25-50 lower). The conversion of large fractions of the measured TF into PFCAs or FTOHs from fluorinated side chains is in contrast to previous studies. Concentrations ranged from

Modeling the Partitioning of Anionic Carboxylic and Perfluoroalkyl Carboxylic and Sulfonic Acids to Octanol and Membrane Lipid.

Perfluoroalkyl carboxylic and sulfonic acids (PFCAs and PFSAs, respectively) have low acid dissociation constant values and are, therefore, deprotonated under most experimental and environmental conditions. Hence, the anionic species dominate their partitioning between water and organic phases, including octanol and phospholipid bilayers which are often used as model systems for environmental and biological matrices. However, data for solvent-water (SW) and membrane-water partition coefficients of the anion species are only available for a few per- and polyfluoroalkyl substances (PFAS). In the present study, an equation is derived using a Born-Haber cycle that relates the partition coefficients of the anions to those of the corresponding neutral species. It is shown via a thermodynamic analysis that for carboxylic acids (CAs), PFCAs, and PFSAs, the log of the solvent-water partition coefficient of the anion, log KSW (A- ), is linearly related to the log of the solvent-water partition coefficient of the neutral acid, log KSW (HA), with a unity slope and a solvent-dependent but solute-independent intercept within a PFAS (or CA) family. This finding provides a method for estimating the partition coefficients of PFCAs and PFSAs anions using the partition coefficients of the neutral species, which can be reliably predicted using quantum chemical methods. In addition, we have found that the neutral octanol-water partition coefficient, log KOW , is linearly correlated to the neutral membrane-water partition coefficient, log KMW ; therefore, log KOW , being a much easier property to estimate and/or measure, can be used to predict the neutral log KMW . Application of this approach to KOW and KMW for PFCAs and PFSAs demonstrates the utility of this methodology for evaluating reported experimental data and extending anion property data for chain lengths that are unavailable. Environ Toxicol Chem 2023;42:2317-2328. © 2023 SETAC.

Per- and polyfluoroalkyl substances in ambient fine particulate matter in the Pearl River Delta, China: Levels, distribution and health implications.

Per- and polyfluoroalkyl substances (PFAS) have attracted worldwide attention as one of persistent organic pollutants; however, there is limited knowledge about the exposure concentrations of PFAS-contained ambient particulate matter and the related health risks. This study investigated the abundance and distribution of 32 PFAS in fine particulate matter (PM2.5) collected from 93 primary or secondary schools across the Pearl River Delta region (PRD), China. These chemicals comprise four PFAS categories which includes perfluoroalkyl carboxylic acids (PFCAs), perfluoroalkyl sulfonic acids (PFSAs), perfluoroalkyl acid (PFAA) precursors and PFAS alternatives. In general, concentrations of target PFAS ranged from 11.52 to 419.72 pg/m3 (median: 57.29 pg/m3) across sites. By categories, concentrations of PFSAs (median: 26.05 pg/m3) were the dominant PFAS categories, followed by PFCAs (14.25 pg/m3), PFAS alternatives (2.75 pg/m3) and PFAA precursors (1.10 pg/m3). By individual PFAS, PFOS and PFOA were the dominant PFAS, which average concentration were 24.18 pg/m3 and 6.05 pg/m3, respectively. Seasonal variation showed that the concentrations of PFCAs and PFSAs were higher in winter than in summer, whereas opposite seasonal trends were observed in PFAA precursors and PFAS alternatives. Estimated daily intake (EDI) and hazard quotient (HQ) were used to assess human inhalation-based exposure risks to PFAS. Although the health risks of PFAS via inhalation were insignificant (HQ far less than one), sufficient attention should be levied to ascertain the human exposure risks through inhalation, given that exposure to PFAS through air inhalation is a long term and cumulative process.

Site-specific spatiotemporal occurrence and molecular congener distributions of naphthenic acids in Athabasca oil sands wetlands of Alberta, Canada.

The Athabasca oil sands region (AOSR) of Alberta, Canada is notable for its considerable unconventional petroleum extraction projects, where bitumen is extracted from naturally-occurring oil sands ore. The large scale of these heavy crude oil developments raises concerns because of their potential to distribute and/or otherwise influence the occurrence, behaviour, and fate of environmental contaminants. Naphthenic acids (NAs) are one such contaminant class of concern in the AOSR, so studies have examined the occurrence and molecular profiles of NAs in the region. We catalogued the spatiotemporal occurrence and characteristics of NAs in boreal wetlands in the AOSR over a 7-year period, using derivatized liquid chromatography-tandem mass spectrometry (LC-MS/MS). Comparing median concentrations of NAs across these wetlands revealed a pattern of NAs suggesting NAs in surface waters derived from oil sands deposits. Opportunistic wetlands that formed adjacent to reclaimed overburden and other reclamation activities had the highest concentrations of NAs and consistent patterns suggestive of bitumen-derived inputs. However, similar patterns in the occurrence of NAs were also observed in undeveloped natural wetlands located above the known surface-mineable oil sands deposit that underlies the region. Intra-annual sampling results along with inter-annual comparisons across wetlands demonstrated that differences in the spatial and temporal NA concentrations were dependent on local factors, particularly when naturally occurring oil sands ores were observed in the wetland or drainage catchment.

Nationwide distribution of per- and polyfluoroalkyl substances (PFAS) in road dust from India.

In India, information on the occurrence and distribution of legacy and emerging per- and polyfluoroalkyl substances (PFAS) is deficient. In the present study, nationwide 79 road dust samples were collected from 12 states and 1 union territory for the analysis of 34 PFAS. Overall, total concentrations of 21 quantified PFAS (∑21PFAS) ranged 23-861 pg/g (median: 116 pg/g), with perfluorooctane sulfonic acid (PFOS) being predominant (median: 19.9 pg/g). Short to long chain perfluoroalkyl carboxylic acids (PFCAs; C4 - C18) were detected, where the concentrations of PFAS decreased with the increase in PFAS carbon chain length. ∑21PFAS was highest in road dust from urban area (n = 27; median: 230 pg/g), followed by suburban (n = 21; median: 126 pg/g) and rural areas (n = 31; median: 76 pg/g), suggesting environmental impacts of industriallization and urbanization on PFAS distribution. PFAS composition in rural road dust was significantly different from those in suburban and urban samples (p < 0.01). Regarding 4 geographical regions of India, PFAS in road dust showed spatial difference where higher concentrations were found in South India compared to other regions. ∑21PFAS were positively associated with city-wise population of India (rs = 0.40, p < 0.01). Strong to moderate positive correlation was observed between ∑21PFAS, fluorotelomer sulfonic acids, and PFCAs (rs = 0.23, 0.30, and 0.28, respectively; p < 0.05) and the total state-wise vehicles in India, suggesting that vehicles exhaust or non-exhaust (e.g., vehicle tire debris and polishing material) might contribute to the PFAS occurrence in Indian road dust. Toddlers (2-5 years) had the highest estimated daily intake of ∑PFAS via road dust ingestion under average-case and worst-case scenarios (0.55 and 1.16 pg/kg bw/day, respectively). This is the first time to evaluate PFAS in Indian road dust nationwide, aiding to provide first-hand data for human exposure to PFAS in India.

Plasma Protein Binding Evaluations of Per- and Polyfluoroalkyl Substances for Category-Based Toxicokinetic Assessment.

New approach methodologies (NAMs) that make use of in vitro screening and in silico approaches to inform chemical evaluations rely on in vitro toxicokinetic (TK) data to translate in vitro bioactive concentrations to exposure metrics reflective of administered dose. With 1364 per- and polyfluoroalkyl substances (PFAS) identified as of interest under Section 8 of the U.S. Toxic Substances Control Act (TSCA) and concern over the lack of knowledge regarding environmental persistence, human health, and ecological effects, the utility of NAMs to understand potential toxicities and toxicokinetics across these data-poor compounds is being evaluated. To address the TK data deficiency, 71 PFAS selected to span a wide range of functional groups and physico-chemical properties were evaluated for in vitro human plasma protein binding (PPB) by ultracentrifugation with liquid chromatography-mass spectrometry analysis. For the 67 PFAS successfully evaluated by ultracentrifugation, fraction unbound in plasma (fup) ranged from less than 0.0001 (pentadecafluorooctanoyl chloride) to 0.7302 (tetrafluorosuccinic acid), with over half of the PFAS showing PPB exceeding 99.5% (fup < 0.005). Category-based evaluations revealed that perfluoroalkanoyl chlorides and perfluorinated carboxylates (PFCAs) with 6-10 carbons were the highest bound, with similar median values for alkyl, ether, and polyether PFCAs. Interestingly, binding was lower for the PFCAs with a carbon chain length of ≥11. Lower binding also was noted for fluorotelomer carboxylic acids when compared to their carbon-equivalent perfluoroalkyl acids. Comparisons of the fup value derived using two PPB methods, ultracentrifugation or rapid equilibrium dialysis (RED), revealed RED failure for a subset of PFAS of high mass and/or predicted octanol-water partition coefficients exceeding 4 due to failure to achieve equilibrium. Bayesian modeling was used to provide uncertainty bounds around fup point estimates for incorporation into TK modeling. This PFAS PPB evaluation and grouping exercise across 67 structures greatly expand our current knowledge and will aid in PFAS NAM development.

An overview on human exposure, toxicity, solid-phase microextraction and adsorptive removal of perfluoroalkyl carboxylic acids (PFCAs) from water matrices.

Perfluoroalkyl carboxylic acids (PFCAs) are sub-class of perfluoroalkyl substances commonly detected in water matrices. They are persistent in the environment, hence highly toxic to living organisms. Their occurrence at trace amount, complex nature and prone to matrix interference make their extraction and detection a challenge. This study consolidates current advancements in solid-phase extraction (SPE) techniques for the trace-level analysis of PFCAs from water matrices. The advantages of the methods in terms of ease of applications, low-cost, robustness, low solvents consumption, high pre-concentration factors, better extraction efficiency, good selectivity and recovery of the analytes have been emphasized. The article also demonstrated effectiveness of some porous materials for the adsorptive removal of the PFCAs from the water matrices. Mechanisms of the SPE/adsorption techniques have been discussed. The success and limitations of the processes have been elucidated.

Impact of precursors and bioaccessibility on childhood PFAS exposure from house dust.

This study investigated the impact of precursors and bioaccessibility on childhood per- and polyfluoroalkyl substances (PFAS) exposure in house dust (n = 28) from Adelaide, Australia. Sum PFAS concentration (∑38) ranged from 3.0 to 2640 µg kg-1 with PFOS (1.5-675 µg kg-1), PFHxS (1.0-405 µg kg-1) and PFOA (1.0-155 µg kg-1) constituting the major perfluoroalkyl sulfonic (PFSA) and carboxylic acids (PFCA). The total oxidizable precursor (TOP) assay was applied to estimate concentrations of unmeasurable precursors that may undergo oxidation to measurable PFAS. Sum PFAS concentration post-TOP assay changed 3.8-112-fold (91.5-62,300 µg kg-1) with median post-TOP assay PFCA (C4-C8) concentrations (92.3-170 µg kg-1) increasing significantly (13.7-48.5-fold). As incidental dust ingestion is a significant exposure pathway for young children, PFAS bioaccessibility was determined using an in vitro assay. Sum PFAS bioaccessibility ranged from 4.6 to 49.3 % with significantly (p < 0.05) higher PFCA (10.3-83.4 %) bioaccessibility compared to PFSA (3.5-51.5 %). When in vitro extracts were assessed post-TOP assay, PFAS bioaccessibility changed (7-1060 versus 137-3900 µg kg-1) although percentage bioaccessibility decreased (2.3-14.5 %) due to the disproportionately higher post-TOP assay PFAS concentration. PFAS estimated daily intake (EDI) was calculated for a 'stay-at-home' 2-3-year-old child. Inclusion of dust specific bioaccessibility values resulted in a 1.7-20.5-fold decrease in ∑PFOA, PFOA and PFHxS EDI (0.02-1.23 ng kg bw-1 day-1) compared to default absorption assumptions (0.23-5.4 ng kg bw-1 day-1). However, when 'worst-case scenario' precursor transformation was considered, EDI calculations were 4.1-187-fold higher that the EFSA tolerable weekly intake value (equivalent to 0.63 ng kg bw-1 day-1), although this was moderated when exposure parameters were refined through PFAS bioaccessibility incorporation (0.35-17.0-fold higher than the TDI). Irrespective of exposure scenario, EDI calculations were below the FSANZ tolerable daily intake values for PFOS (20 ng kg bw-1 day-1) and PFOA (160 ng kg bw-1 day-1) for all dust samples analysed.

Sub-ppm determination of perfluorinated carboxylic acids in solution by UV-vis high-performance liquid chromatography through solid phase extraction.

This study investigated a novel and sensitive analytical method based on a simple heat-based derivatization using 3-bromoacetyl coumarin as the reagent and analysis with a HPLC-UV system or just a UV-vis spectrometer to allow the sub-ppm determination of PFCAs in water solution with the potential for utilization in simple laboratories and field laboratory scenarios. A Strata-X-AW cartridge was used for the solid phase extraction (SPE) procedure and higher than 98% recoveries were obtained. The derivatization condition showed that a high efficiency of peak separation was obtained with obviously different retention time among various PFCAs derivatives using HPLC-UV analysis. The derivatization stability and repeatability showed favorable results with stable derivatized analytes for ≤12 h and a relative standard deviation (RSD) of <2% for all repetitions. The limit of detection for the HPLC-UV analysis was between 0.1 ppm and 0.5 ppm. A satisfactory linearity response was found with R2 >0.998 for all individual PFCA compounds. The limit of detection for simple UV-Vis analysis was <0.0003 ppm to measure the presence of PFCAs. Contamination of standards with humic substances and measurement of industrial samples in a complex wastewater matrix showed no adverse effects on the accuracy of PFCA determination by using the developed methodology.

Evaluation of a Delta-9-Tetrahydrocannabinol Carboxylic Acid (Δ9-THC-COOH) Immunoassay and a Gas Chromatography-Mass Spectrometry (GC-MS) Method for the Detection of Delta-8-Tetrahydrocannabinol Carboxylic Acid (Δ8-THC-COOH).

BACKGROUND: Delta-8 tetrahydrocannabinol (Δ8-THC) is a naturally occurring or synthetically prepared cannabinoid that elicits psychological and physiological experiences commonly reported for its more infamous isomer, delta-9 tetrahydrocannabinol (Δ9-THC). Unlike Δ9-THC, Δ8-THC products are generally legal under federal law and there has been a rise in their usage. One of the main targets for detection and quantitation of Δ9-THC is its inactive metabolite, 11-nor-9-carboxy-Δ9-tetrahydrocannabinol (Δ9-THC-COOH). METHODS: This study evaluated the ability of the currently used Δ9-THC-COOH immunoassay and gas chromatography-mass spectrometry (GC-MS) methods to detect 11-nor-9-carboxy-Δ8-tetrahydrocannabinol (Δ8-THC-COOH) and distinguish it from Δ9-THC-COOH. RESULTS: The EMIT II Plus® Cannabinoid immunoassay for Δ9-THC-COOH with a cutoff of 20 ng/mL showed positive results for Δ8-THC-COOH with concentrations of 30 ng/mL or higher. Although many of the ion fragments generated by mass spectrometry were found to overlap between the 2 compounds, the GC-MS method presently used to quantify Δ9-THC-COOH separated the 2 compounds sufficiently to identify them independently by relative retention time. CONCLUSION: Current immunoassays and GC-MS methods should be evaluated for the ability to detect and distinguish the presence of Δ8-THC-COOH.

On-Tissue Chemical Derivatization for Comprehensive Mapping of Brain Carboxyl and Aldehyde Metabolites by MALDI-MS Imaging.

The visualization of small metabolites by MALDI mass spectrometry imaging in brain tissue sections is challenging due to low detection sensitivity and high background interference. We present an on-tissue chemical derivatization MALDI mass spectrometry imaging approach for the comprehensive mapping of carboxyls and aldehydes in brain tissue sections. In this approach, the AMPP (1-(4-(aminomethyl)phenyl)pyridin-1-ium chloride) derivatization reagent is used for the covalent charge-tagging of molecules containing carboxylic acid (in the presence of peptide coupling reagents) and aldehydes. This includes free fatty acids and the associated metabolites, fatty aldehydes, dipeptides, neurotoxic reactive aldehydes, amino acids, neurotransmitters and associated metabolites, as well as tricarboxylic acid cycle metabolites. We performed sensitive ultrahigh mass resolution MALDI-MS detection and imaging of various carboxyl- and aldehyde-containing endogenous metabolites simultaneously in rodent brain tissue sections. We verified the AMPP-derivatized metabolites by tandem MS for structural elucidation. This approach allowed us to image numerous aldehydes and carboxyls, including certain metabolites which had been undetectable in brain tissue sections. We also demonstrated the application of on-tissue derivatization to carboxyls and aldehydes in coronal brain tissue sections of a nonhuman primate Parkinson's disease model. Our methodology provides a powerful tool for the sensitive, simultaneous spatial molecular imaging of numerous aldehydes and carboxylic acids during pathological states, including neurodegeneration, in brain tissue.

Electronic-waste-associated pollution of per- and polyfluoroalkyl substances: Environmental occurrence and human exposure.

Occupational exposure to per- and polyfluoroalkyl substances (PFASs) is of serious concern because their adverse health effects. Nevertheless, knowledge regarding contamination in e-waste dismantling regions is rather scarce. We therefore analysed seven neutral PFASs (n-PFASs) and forty ionized PFASs (i-PFASs) in dust and hand wipes collected from an e-waste dismantling plant and homes. Both dust (1370 ng/g) and workers' hand wipe (1100 ng/m2) in e-waste dismantling workshops contained significantly higher median levels of ∑PFASs than those from homes (684 ng/g and 444 ng/m2) (p < 0.01). ∑PFAS concentrations in dust and on workers' hand wipes from workshops were significantly higher than those from storage area. 8:2 fluorotelomer alcohol was the dominant n-PFAS in workshop dust (70.7%) and on worker's hand wipes (46.6%). Perfluoroalkyl carboxylic acids (C2 -C3) were the significant components (based on concentration) of i-PFASs in dust (57.9%) and on hand wipes (89.6%). A significant positive correlation (p < 0.001) of ∑PFAS concentrations between workshop dust and workers' hand wipes was observed, indicating that they come from common sources. Compared to dust ingestion, hand-to-mouth contact was highlighted as a vital exposure route, accounting for 68.8% for workers and 72.2% for residential population, respectively, of the sum of two exposure doses.